Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.
With professional Aramid Fiber Packing factory, Ningbo Kaxite Sealing Materials Co.,Ltd is one of the leading China Aramid Fiber Packing manufacturers and suppliers.
Style KXT P307 Aramid Fiber Packing
Aramid Fiber Packing is braided from high quality Dupont Aramid/Kevlar fiber with PTFE Impregnation and lubricant additive. Extremely
hard wearing. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but may damage the shaft if not
used properly. A minimum shaft hardness of 60HRC is therefore recommended. Compared with other kinds of packing, it can resist more
severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in.
Advantages
• Extremely durable and abrasion resistant packing
• Well suited for difficult sealing applications
• Used in connection with most chemicals
• Extreme abrasion resistance
Application
• Used in connection with most chemicals
• Ideal for abrasive sand, slurry and other gritty media
• Water
• Steam
• Solvents
• Oil., etc
Main Features:
Pressure |
Rotary pump |
80 bar |
Reciprocating pump |
200 bar |
|
Static Sealing |
300 bar |
|
Rotary speed |
22 m/s |
|
Density |
1.4g/cm3 |
|
Temperature |
-100~+280°C |
|
PH Value |
2~12 |